Hdd Auto Detection; Save & Exit Setup; Exit Without Saving - SOLTEK SL-65FVB User Manual

3-10 HDD AUTO DETECTION

• IDE HDD AUTO DETECTION option can automatically detect and find the
parameters of IDE Hard Drive. Meanwhile, the informations that BIOS de-
tected will record to the STANDARD CMOS SETUP screen.
• The screen will request you to select a specific Hard Drive for Primary
Master after you select this option. If you accept a Hard Drive detected by
the BIOS, you can press "Y" to confirm and then press <Enter> to check
next Hard Drive. This function allows you to check four Hard Drives and
you may press <ESC> after the <Enter> to skip this function and go back to
the Main Menu.
3-11 SAVE & EXIT SETUP
• SAVE & EXIT SETUP allows you to save all modifications you have speci-
fied into the CMOS memory. Highlight this option on the Main Menu and
the following message appears:
Press <Enter> key to save the configuration changes.

3-12 EXIT WITHOUT SAVING

• EXIT WITHOUT SAVING option allows you to exit the Setup Utility without
saving the modifications that you have specified. Highlight this option on
the Main Menu and the following message appears:
You may change the prompt to "Y" and press <Enter> key to leave this op-
tion .
"SAVE to CMOS and EXIT (Y/N) ?
"Ouit Without Saving (Y/N) ?
65FVB/65FVB-X
Y "
N "
47