8-channel digitally encoded video + 8 channels of bi-directional data using small form-factor pluggable (sfp) optical devices (8 pages)
Summary of Contents for Comnet netwave NWKED
Page 1
QUICK START GUIDE NWKED VIDEO ENCODER/DECODER KIT FOR USE WITH NETWAVE WIRELESS ETHERNET Thank you for purchasing NetWave from ComNet. This quick start guide is designed to ® This manual serves the following walk you through installation. ComNet Model Number:...
Page 3
QUICK START USER GUIDE NWKED FIGURE 3 – INSTALLATION INSTRUCTIONS Step 1. Unpack the hardware from the box. Instructions for the Decoder and the Encoder are the same. Step 2. A. Connect the Power Adapter with the Terminal Block B. Connect the Terminal Block to the power port on the device Step 3.
Shielded outdoor CAT 5 or better should be used for all out of plant Ethernet connection and should be properly grounded through the PoE AC ground. Industrial grade shielded Ethernet cable is recommended to help prevent ESD damage commonly experienced with outdoor installations. Visit www.comnet.net/comnet-products/cables CONFIGURING NETWAVE 1.
Need help?
Do you have a question about the netwave NWKED and is the answer not in the manual?
Questions and answers