3
Q9. The back of the original can be seen through. How can I make adjustment so that the
3.9
Q9. The back of the original can be seen through. How can I make
adjustment so that the back may not bleed into the scanned im-
age?
A9. You can adjust the density of the background color for clean scanning.
Operation procedure
1
Load the original.
2
Tap [Scan/Fax] and select a destination.
3
Tap [Application] and select [Background Removal].
4
Tap [Bleed Removal], set the level of back bleeding, then tap [OK].
% Set to [Auto] to have this machine automatically adjust the bleed level.
5
Press Start to start scanning of the original.
% Press Preview before Start to check the finishing on the Touch Panel. For the procedure for check-
ing the finishing, refer to the User's Guide DVD.
3-16
d-Color MF552/452/362/282/222
3.9