2. The video from any of the cameras on the unit along with the telemetry control buttons for testing
will be displayed
This allows you to view any of the enabled inputs on the DV-IP Server, control the telemetry connected
to the system and set up any features that are required for your application; such as presets. You can
also access the camera menus from this page allowing you to configure parameters that are only
programmable from the camera menu.
Note: Review the relevant documentation for the camera to see how you navigate the camera
menus. Remember to save any configuration settings in the dome menu!
Supported Modems/TA's
Generic AT Modem
3ComImpact II
KTX 33600 – Modem
PSL - ISDN TA
Nokia30 HSCSD V.110
SHIVA LanRover
Spider 4 CDPD Modem
Dedicated Micros Ltd
3Com US Robotics 56K Modem
Falcom GSM Phone / Modem
PLANET Smart IP
Nokia30 GSM
Nokia30 HSCSD V.120
Siemens TC35GPS / MC35 GPRS
Zyxel Omni-net.D - ISDN TA
Page 69
Need help?
Do you have a question about the dv-ip and is the answer not in the manual?