Gas Connection Requirements - For Models Equipped For Natural Gas - KitchenAid W10117506B Installation Instructions And Use And Care Manual

Natural Gas
Built-in sear burner models are equipped for use with Natural
gas. They are design-certified by CSA International for LP
(propane or butane) gases with appropriate conversion.
Built-in models are set for Natural gas use and have a pressure
regulator with ½" female pipe threads.
A
A. Sear burner gas pipe
B. New CSA International approved
"outdoor" flexible gas supply line
C. Rear of sear burner
D. To Natural gas supply
The supply line shall be equipped with an approved shutoff valve.
This valve should be located in the same area as the sear burner
and should be in a location that allows ease of opening and
closing. Do not block access to the shutoff valve. The valve is for
turning on or shutting off gas to the sear burner.
A
A. Gas supply line
B. Shutoff valve "open" position
C. To sear burner
12
Gas Connection Requirements
For Models Equipped for Natural Gas
B
C
D
B
C
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. A qualified
Natural gas technician shall provide the LP gas supply to the
selected sear burner location in accordance with the National
Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition, and local
codes.
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A
A. Sear burner gas pipe
B. New CSA International approved
"outdoor" flexible gas supply line
C. Rear of sear burner
D. To local LP gas supply
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
B
C
D