Table of Contents
Advertisement
Appears when
measurement value is
stored in memory or is
recalled from memory.
Appears when batteries
should be replaced.
Occurs when a error was made during measurement.
1. Press down and lift the battery cover in the direction of the arrow
to open the battery compartment.
2. Install 4 "AA" 1.5 V Alkaline batteries according to the
indication inside the compartment.
3. Replace the battery cover by inserting the bottom tabs first, then
push in the top end of the battery cover.
Replace batteries when:
1. Low battery icon appears on display.
2. The On / Off / Start button is
pushed and nothing appears
on display.
Display Explanation
Date and time
Systolic pressure
Diastolic pressure
Pulse rate
Installing Batteries
Appears when blood
pressure reading is higher
than 160 mmHg (sys.) or
95 mmHg (dia.)
Shows the pulse rate per
minute.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Inflate and is the answer not in the manual?
Questions and answers