Taking A Measurement - Physio Logic Smart Inflate Instruction Manual

1. Press the On / Off / Start button. All displays will appear for
approximately one second before returning to "0".
2. The unit will automatically start to inflate and begin to measure
your blood pressure. During inflation, a changing measure of the
cuff pressure will be shown on the display.
3. When pressure reaches your systolic blood
pressure, the monitor will deflate the cuff
automatically. When the monitor
completes the measurement, it will display
and save your systolic, diastolic, and pulse
readings to memory. Up to 60 memories
can be saved.
This monitor has a built-in alert feature. If
your blood pressure reading is higher than
160 mmHg (SYS) or 95 mmHg (DIA), an
alert icon will show on the display. This
reminds you that your measurement fell
outside of the high blood pressure limits. If
this should persist, it is recommended to see
your physician.
4. Measurement is now completed. Press the On / Off / Start button
to turn the unit off. If no button is pressed, the unit will shut off
automatically in 1 minute.

Taking a Measurement

10