Recalling Memory; Time Adjustment - Physio Logic Smart Inflate Instruction Manual

1. To recall stored blood pressure readings from memory, simply
press the Memory button. The last set of memorized readings
will be displayed.
2. Another press of the Memory button will recall the previous set
of readings.
1. Press and hold the (
more than 3 seconds to enter Time
Adjustment Mode. The display
will show a blinking Month.
2. Press the " " or " " to change the +
Month.
3. Press the (
confirm the entry.
4. The display will then show a
blinking Date, followed by Hour
and Minutes. Repeat steps 2 and 3
to adjust the date/time setting.

Recalling Memory

Time Adjustment

) button for
–
) button again to
8
Hold for
more than
3 seconds
Blinking
month
Changing
or
month
Confirm
the
entry