Troubleshooting; Cautionary Notes - Physio Logic Smart Inflate Instruction Manual

Symptom:
No display when the On / Off / Start button is pressed.
Correction:
new alkaline batteries. If the batteries are not in the correct
position, re-insert them with the correct polarities.
Symptom:
EE mark shown on display or the blood pressure value
is displayed excessively low (high).
Correction:
correctly. If you talked or moved during the measurement, measure
it again quietly.
Note: If the unit does not work, please call our consumer
information line at 1-800-363-2381. Under no circumstance
should you disassemble the unit and attempt repairs.
1. Avoid extreme temperatures, humidity, and direct sunlight.
Avoid dropping or strongly shocking the main unit, and protect
it from dust.
2. Clean the blood pressure monitor body and the cuff carefully
with a slightly damp, soft cloth. Do not press. Do not wash the
cuff or use chemical cleaner.
3. Remove the batteries when the unit is not used for a long time.
4. The unit should not be operated by children.
5. This device might not be suitable for use by people with
common arrhythmias, such as atrial or ventricular premature
beats or atrial fibrillation. It is not designed for ambulatory use.

Troubleshooting

If the batteries have run down, replace them with
Wrap the cuff properly so that it is positioned

Cautionary Notes

11