How Do I Get Started - LightwaveRF JSJSLW260 Instruction Manual

How do I get started?

Please refer to the following installation and
setup instructions that will guide you through
the installation and setup process.
What do I need?
To install the socket, you will need to remove and
replace the existing power socket. This is usually
straightforward, but you must ensure that there
is a suitably deep backbox and understand how
to safely turn o
also need suitable electrical screwdrivers.
Help video & further guidance
For additional guidance, and to watch a video
that will help guide you through the installation
process, please visit the support section on
www.lightwaverf.com
the electricity supply. You will
Get Started