LightwaveRF JSJSLW260 Instruction Manual page 14

Remote Operation
Locking the Socket
• LightwaveRF sockets can be 'locked' so that the manual buttons will not
operate them. This can be achieved from the LightwaveRF App or using a
'Socket Locker' Remote. If locked on, the socket will not turn o manually: if
locked o , then the socket will not turn on manually. A locked socket is
signified by a slow flashing amber LED or simultaneously flashing blue &
amber LEDs.
• To lock/unlock the socket, press the 'unlock' button on the Smartphone
App or Socket Locker. If the Socket locker is misplaced, the Sockets can be
reset by turning of mains power to the circuit for a period of 30 seconds.
Understanding flashing LED Sequences on the socket
Flashing blue & amber alternately: socket in Linking Mode
Quickly flashing blue: socket successfully linked
Quickly flashing amber: socket unlinked / memory cleared
Slowly flashing amber: socket memory full / socket locked
Blue & flashing amber: socket successfully locked / unlocked