Get Started
How do I get started?
Please refer to the following instructions that will
guide you through the setup of a LightwaveRF
Dusk to Dawn Sensor. Once successfully setup,
the Sensor will automatically switch on and o
LightwaveRF devices at dusk or dawn.
How does it work?
The Dusk to Dawn Sensor is a wireless and
portable sensor and should be positioned in a
place suitable to measure the ambient light level.
As it is waterproof, It can be positioned outdoors,
although it must be within the 15m range of the
LightwaveRF devices intended to be switched.
Help video & further guidance
For additional guidance, and to watch a video
that will help guide you through the installation
process, please visit the support section on
www.lightwaverf.com