Table of Contents
Advertisement
Quick Start Guide
Device Setup
Clearing the memory (will remove any linked App or Controllers):
1. On the socket , press and hold down
the 'on/o ' button until the blue and
amber LEDs flash alternately, and then
release it. That Socket is now in linking
mode.
2. Press and hold down the 'on/o '
button again until the blue and amber
LEDs flash simultaneously, then tap
(don't hold) the 'on/o ' button a further
time; the amber LED will flash quickly to
confirm that the memory has been
cleared.
NOTE: Reliable range of remote operation is around 15 metres indoors and
up to 100m outdoors using the Lightwave Link. This figure may vary
depending upon the environment; very thick walls, bodies of water or large
metal objects may interfere with radio range.
If the distance between the transmitter and receiver is too great to achieve
reliable operation, the LightwaveRF Signal Booster may be used in
conjunction with this product to increase the range.
Advertisement
Table of Contents
