Calling By Voice Recognition; Dial By Number - Toyota 2012 RAV4 EV infotainment system Quick Reference Manual

1
step
Press
the beep say, "Use the Phone."
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
3
step
After the beep, say "Dial" or press
on the steering wheel.
Some Bluetooth
phones may or may not show battery or signal strength
on the display.
Quick Tip - It is recommended that you reduce
background noise prior to using the Voice
Recognition system. Conversation, high fan speed,
wind noise (open windows), etc., may prevent the
voice recognition system from understanding your
commands.

CALLING BY VOICE RECOGNITION

on the steering wheel. After
® equipped cell
2
step
After the beep say, "Dial <number>."
Say the phone number digits
individually, without pausing (e.g. "Dial
Three, one, zero, four...").
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.
4
step
Call is active when
indicated. To end call, press
on the screen or
wheel.

DIAL BY NUMBER

is
on the steering
4