Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 149

1. PHONE OPERATION
When the "POWER" switch is in ACCES-
SORY or ON mode, the system searches
for a nearby registered cellular phone.
The system will connect with the phone
that was last connected, if it is nearby.
When "Display Phone Status" is set to
"On", the connection status is displayed.
®
(See "Bluetooth
TION STATUS DISPLAY SETTINGS" on
page 173.)
This screen appears when the Bluetooth
phone is first
"POWER" switch is in ACCESSORY or
ON mode.
INFORMATION
●
It may take time if the phone connection
is carried out during Bluetooth
playback.
130
DEVICE CONNEC-
connected after
®
device
MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "HOME" button and touch
"Phone", or press the
the steering wheel.
2
Touch "Connect Phone".
®
the
3
Touch the screen button correspond-
ing to the desired phone connection.
When the cellular phone's device name
has not been able to be obtained, "Device
1" to "Device 5" will be displayed in the
order the phones were registered.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
man-
switch on