Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 268

1. ENTUNE-OVERVIEW
2. BEFORE USING ENTUNE
SETTINGS REQUIRED TO
USE ENTUNE
Perform the settings in the following order.
1
User registration
2
Download the Entune application to
your cellular phone.
3
Register the cellular phone with the
navigation system.
In order to use Entune, the following set-
tings must first be performed:
User registration with the service contract
(See page 254.)
Download the Entune application onto
your cellular phone, and login to the appli-
cation. (See page 254.)
Register the cellular phone that the
Entune application was downloaded to
with the navigation system. (See page
254.)
Register a Bluetooth
hands-free system. (For detailed informa-
tion about registration and settings, see
®
"Bluetooth SETTINGS" on page 164.)
USER REGISTRATION
When purchasing the vehicle, an email
address is registered at your Toyota
dealer. If your email address was not
registered at your Toyota dealer, your
email address can be registered at the
Entune website. A user registration
guidance email containing a web ad-
dress will be sent.
1
Perform user registration from the des-
ignated web address.
254
®
phone with the
REGISTERING THE ENTUNE
APPLICATION
1
Download the Entune application using
your cellular phone.
2
Run the Entune application on your
cellular phone.
3
Enter a user name and password into
the Entune application. Login to the ap-
plication.
INFORMATION
●
"Apps" can only be used when the
Entune application
downloaded to your cellular phone and
the application is running.
●
If your email address was not registered
at your Toyota dealer when the vehicle
was purchased, an email address can
be registered at http://www.toyota.com/
entune/.
●
Entune operational procedures can also
be confirmed
www.toyota.com/entune/.
●
In order to use "Apps", it is necessary to
run the Entune application, enter your
user name and password and display
the main menu on the cellular phone.
●
An iPhone cannot be connected via
®
Bluetooth and USB connection at the
same time. However, it is possible to
recharge an iPhone while using Entune
by connecting via USB. The system
uses the connection method that was
used last. Therefore, if connected via
USB after Bluetooth
necessary to reconnect the iPhone via
®
Bluetooth .
has been
by visiting http://
®
connection, it is