Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 241

Navigation/audio system with entune
Hide thumbs Also See for 2012 RAV4 EV infotainment system:
Table of Contents

Advertisement

3
Say the command displayed on the
screen.
If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Touch "Go Back".
• Press the
wheel.
To cancel voice recognition, touch "Can-
cel", or press and hold the talk switch.
switch on the steering
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
If the navigation system does not
respond or the confirmation screen does
not disappear, press the talk switch and
try again.
If a voice command cannot be recog-
nized within 6 seconds, voice guidance
will say "Pardon?" ("Command not rec-
ognized." will be displayed on the
screen) and voice command reception
will restart.
If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
"Paused. To restart voice recognition,
push the talk switch. To cancel voice
recognition, push and hold the talk
switch." Voice recognition will then be
suspended. Touch "Cancel" or "Go
Back", or press the
steering wheel.
The voice recognition prompt can be set
to on or off when "Voice Prompts" is
touched. This setting can also be
changed on the "Voice Settings" screen.
(See page 52.)
When "Voice Prompts" is touched,
voice recognition will be temporarily sus-
pended. Press the talk switch again.
Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk
switch and hearing a beep.
switch on the
6
225

Advertisement

Table of Contents
loading

Table of Contents