Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 200

Navigation/audio system with entune
Hide thumbs Also See for 2012 RAV4 EV infotainment system:
Table of Contents

Advertisement

PRESETTING A STATION
Radio mode has a mix preset function,
which can store up to 36 stations (6
stations per page x 6 pages) from any
of the AM, FM or SAT bands.
1
Tune in the desired station.
2
Touch one of the left side screen but-
tons (1-6) and hold it until a beep is
heard. This sets the frequency to the
screen button. The station's frequency
will be displayed in the screen button.
To change the preset station to a different
one, follow the same procedure.
1. AUDIO SYSTEM OPERATION
SELECTING A STATION
Tune in the desired station using one
of the following methods.
Preset tuning: Touch one of the mix pre-
set channels on the left side of the screen
to select the desired station. The screen
button is highlighted and the station fre-
quency appears on the screen.
To scan all the frequencies: Touch
"SCAN". "SCAN" will appear on the
screen. The radio will find the next station
and stay there for 10 seconds if "ALL" or
"HD ONLY" is selected, or 5 seconds if
"ANALOG" is selected, and then scan
again. To stay tuned to a station and stop
the scanning, touch "SCAN" again. (To
set HD Radio
system, see page 220.)
5
183

Advertisement

Table of Contents
loading

Table of Contents