Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 242

1. VOICE COMMAND SYSTEM OPERATION
MICROPHONE
It is unnecessary to speak directly into
the microphone when giving a com-
mand.
INFORMATION
●
Wait for the confirmation beep before
speaking a command.
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
226
VOICE COMMAND EXAMPLE:
SEARCHING FOR A ROUTE TO
YOUR HOME
1
Press the talk switch.
2
Say "Go home".
A confirmation screen will be displayed
showing the recognition results.
3
Say "Yes" or touch "Yes".
The system starts searching for a route to
your home.
When the voice command is recognized,
the map of the area around the home
address will be displayed and route guid-
ance to the home address will begin.
If a home address is not registered,
voice guidance will say "Your home is
not set. Please try again after setting a
home location."
prompted to enter a home address.
(See page 92.)
and you will be