Toyota 2012 RAV4 EV infotainment system Quick Reference Manual page 132

4. SETUP
■
POSITION/DIRECTION
TION
When driving, the current position
mark will be automatically corrected by
GPS signals. If GPS reception is poor
due to location, the current position
mark can be adjusted manually.
1
Touch "Position / Direction".
2
Scroll the map to the desired point.
3
Touch "OK".
4
Touch either the
the direction of the current position
mark.
5
Touch "OK".
The map will be displayed.
112
CALIBRA-
or to adjust
■
TIRE CHANGE CALIBRATION
The tire change calibration function will
be used when replacing the tires. This
function will adjust
caused by the circumference differ-
ence between the old and new tires.
1
To perform the distance calibration
procedure, touch "Tire Change".
The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map will be dis-
played.
INFORMATION
●
If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
POP-UP INFORMATION
When "Pop-up information" is turned
on, pop-up information will be dis-
played.
1
Press the "HOME" button.
2
Touch on the "Main Menu" screen.
3
Touch "Navigation" on the "Setup"
screen.
4
Touch "Detailed Navi. Settings" on
the "Navigation Settings" screen.
miscalculation