Figure 58 - Card Test Ramp Time; Figure 59 - Alarm Output During A Card Test - General Monitors TA102A Instruction Manual

TA102A
0 - 100% LEL
READY
SETUP
MODE/
SELECT
GENERAL
MONITORS
Next, the display will indicate the alarm output option during a Card Test as either Ac,
active or nA, not active. (Figure 59). Not Active is the factory default for this selection.
TA102A
0 - 100% LEL
READY
SETUP
MODE/
SELECT
GENERAL
MONITORS
Figure 59 – Alarm Output During A Card Test
NOTE - Selecting nA option for the Card Test will not inhibit the Fault or A1/A2 alarm
circuits in the event of a malfunction or gas condition.
SETUP MODE
FLASHING for SETUP
CHECK MODE,
STEADY FOR SETUP MODE
Figure 58 – Card Test Ramp Time
SETUP LED
FLASHING for SETUP
CHECK MODE,
STEADY FOR SETUP MODE
32
Model TA102A
TA102A
0 - 100% LEL
READY
SETUP
MODE/
SELECT
GENERAL
MONITORS
TA102A
0 - 100% LEL
READY
SETUP
MODE/
SELECT
GENERAL
MONITORS