2.2
Features & Benefits
2.2.1 Microprocessor Based Electronics
Monitors fault conditions; sensor inputs and provides outputs in the form of display
codes, analog signal, relay contact and open collector activation.
2.2.2 Setup Mode
Allows the user to set parameters such as alarm output options, test options, etc. These
parameters are viewed on the display during the Setup Mode.
2.2.3 Password Option
Prevents unauthorized alteration of the setup parameters (can be disabled).
2.2.4 Setup Check Mode
Allows the user to view the parameters that have been set by the factory and/or an
operator.
2.2.5 LED Test
Tests the integrity of each LED and each segment of the digital display on the front
panel.
2.2.6 Card Test
Tests the functionality of the card through the microprocessor, ramping the signal from 0
to full-scale.
2.2.7 Live Insertion/Removal
Allows the user to insert or remove a module while power is applied to the system,
without damage to any of the components in the system.
2.3
Applications
The General Monitors Model TA102A is a Combustible Gas Control Module designed
for Zero Two Series Applications. Below is a partial list of applications:
• Refineries
• Gas and oil production platforms
• Oil well logging operations
• Gas Turbines
• Hydrogen Storage
• Chemical plants
• Drilling platforms and rigs
• Gas collection facilities
• LPG/LNG processing and storage
• Solvent Vapors
• Wastewater treatment plants
7
Model TA102A