General Description; Figure 18 - Model Ta102A - General Monitors TA102A Instruction Manual

Model TA102A
2.0 Introduction
This chapter provides a brief description of the Model TA102A, its features & benefits
and a list of some of its applications. More detailed information on the features and
benefits listed in Section 2.2 will be presented in later chapters.
WARNING - Installation and Maintenance must be carried out by suitably skilled and
competent personnel only.
2.1

General Description

The General Monitors Model TA102A (see Figure 18) is a single channel Combustible
Gas detection Control Module designed for use in Zero Two Series Gas and Flame
Detection Systems. This Module connects to the wires from a field mounted General
Monitors Catalytic Bead Sensor and monitors the presence of combustible gases and
vapors. The Model TA102A is electrically and physically compatible with the other gas
detection, flame detection and system modules in the Zero Two Series. It is
distinguished from the other modules by its blue border and "TA102A" in the upper right
corner of the front panel. The Model TA102A is designed for use in non-hazardous
environments.
Figure 18 – Model TA102A
6