Connections - Prodipe Pro10s User Manual

2 – Connections
To ensure the proper implementation of your monitor system, please adhere to the following
procedures at all times:
1. Check your audio lead.
2. Switch on the other equipment you intend to use (audio mixer, PC, audio source, etc.)
3. Check your monitor settings and the settings of your audio sources (lowest volume).
4. Check the voltage
position and the blue LED
Note that: when you want to shut everything down, the Prodipe monitors must be switched
off first (Switch in the OFF position and the blue LED
Careful: choosing the 'AC Select'
make any changes when the system has been switched off (Switch
and the power supply lead unplugged).
SOURCE
AC SELECT
FUSIBLE
4
, switch on the Prodipe monitors by putting switch
will light up.
voltage depends on your power supply. You should
Pro 5
100V – 220V –
120V 240V
115V 230V
1A 500mA
1
Copyright © 2005 IPE Music
off).
Pro 8
100V – 220V –
120V 240V
115V 230V
2A 1A
Figure 2
2
in the ON
in the OFF position
Pro 10s
100V – 220V –
120V 240V
115V 230V
3.15A 1.6A
3
Page 2