Setting The Dialing Mode; Setting The Tone Ringer - Siemens Euroset 825 Operating Instructions Manual

22.1.97
Basic settings

Setting the dialing mode

When you first receive your telephone, it will have been set to tone dialing (DTMF).
If your exchange happens to be using the old dialing pulse method, you will have to
make the appropriate changes. To do this, proceed as follows:
c
f
< >
Settings?
< >
Parameters?
Dialing mode?
<>
N

Setting the tone ringer

You can set the tone ringer volume, pitch, and melody separately. The volume can be
set to 7 different levels, the pitch (tone sequence frequency) to 4, and the melody to
10.
825I-E2.FM NEC, euroset 825 IM English: A30350-X102-X22-1-7619
Lift the handset.
Press the F key.
Choose "Settings"
from the menu, and enter
the PIN.
Choose "Parameter"from the
menu.
Confirm the menu item
"Dialing mode".
You will now be shown
which dialing mode is active.
"DTMF/flash" means that
tone dialing has been set.
Select "Dial pulsing"from the
menu.
Confirm the menu item.
The new dialing mode is
stored.
Phone book?
Phone menu:
Phone book?
Enter PIN:
Dialing mode:
active: DTMF/flash?
Dialing mode:
new: Dial pulsing?
Entry stored!
17