Product Information; Supported Display Modes - Matrox DualHead2Go Series User Manual

Product information

Supported display modes

Multi-display setup
Stretched mode
* While using flat panel monitors, we recommend using a refresh rate of 60 Hz.
Notes
! For the latest compatibility information, see the Matrox Web site
(www.matrox.com/graphics/dualhead2go/support).
Only one (1) Matrox DualHead2Go product at a time can be connected to your
!
computer.
! The display resolutions and refresh rates available depend on your monitor and software
monitor settings. For more information on the capabilities of your monitor, see your
monitor documentation.
! The highest display resolution supported for analog monitors is 2560 × 1024 (that is,
1280 × 1024 for each display).
! While using Intel chipsets, certain limitations may apply. (For example, a 2560 × 1024
display resolution isn't supported.)
While using a 2560 × 1024 display resolution, certain graphics hardware may not
!
properly support 3D acceleration. For information on the capabilities of your graphics
hardware, see its documentation.
! While using some graphics software, certain limitations may apply.
! To get the most of your Matrox product, we recommend you use two identical monitors
(that is, monitors that support the same settings such as display resolution and refresh
rate). For more information on the settings your monitor supports, see your monitor
documentation.
! While using Matrox DualHead2Go, using software-based On-Screen Display (OSD)
controls to adjust the image quality of your monitors isn't supported.
While an unsupported display mode is selected, your displays may be unusable.
!
Display resolution
2560 × 1024
2048 × 768
Matrox DualHead2Go Series – User Guide 13
Vertical refresh rate (Hz)
60
60, 75, and 85
*