Matrox DualHead2Go Series User Manual page 11

Problem In multi-display mode, displays aren't numbered consecutively
1
Cause
If you have more than one graphics card in your computer, the display
numbering may not be consecutive for the displays of a multiple-
display card. Display numbering depends on the types of expansion
slots used in your computer (AGP, PCI, or PCIe) and the BIOS settings of your computer.
1
Solution
Windows 2000/XP – Move the displays in Windows.
Right-click your Windows desktop background, then click
1
Select a display and move it according to the physical position of the monitor it's
2
associated with.
2
Cause
Your Matrox product may not be properly connected. (For example, your connection setup
may be inverted.)
1
Solution
Make sure your Matrox product is properly connected. For more information,
"Connection setup", page
Problem Program window or dialog box doesn't appear on screen
1
Cause
Another window or dialog box may be covering the window or dialog box you want to see.
1
Solution
Move, close, or minimize any window or dialog box that may be covering the window or
dialog box you want to see.
2
Cause
If you're using multi-display mode, the program window or dialog box may be in a display
or on a monitor that's unusable. (For example, your monitor may not be properly connected
or configured.)
1
Solution
Make sure all the displays and monitors you want to use are usable. For more information,
see other troubleshooting items in this guide.
3
Cause
The program window or dialog box may be somewhere off-screen.
1
Solution
If the program window you want to see is named on the Windows taskbar, right-click on it
and select
position. To fix this problem, see the other solutions.)
2
Solution
Manually move the program window or dialog box:
Press [Alt]+[Space].
1
3.
. (If you click
Maximize Restore
Properties
the program window goes back to its previous
Matrox DualHead2Go Series – User Guide 11
" .
Settings
see