Quick Gps Position - Mio DigiWalker A502 User Manual

If the navigation program is installed on the device, you can perform the
following operations upon receiving such messages. (Note that the
available operations depend on the type and version of the navigation
program.)
Navigate Directly starts the navigation program and navigates to the
location contained in the message.
Show on Map starts the navigation program and shows on the map the
location contained in the message.
Get Address starts the navigation program and acquires the address of
the location contained in the message.
Save to POI Favorite starts the navigation program and adds the
location contained in the message to the Point-of-Interest (POI) data.
Reply replies with a text-only message or with a message that contains
the GPS data of your current location.
Delete/Delete All deletes one or all messages.
NOTE: The navigation might not be absolutely accurate when the location is near the
border on the map.
8.3

Quick GPS Position

Updating the satellite calibration data (ephemeris) file is helpful for quick
GPS positioning when using the optional navigation program. You can
update the satellite calibration data from the GPS module manufacturer's
server using Quick GPS Position.
1. You need to connect to the Internet to
download the new satellite calibration data
file. (See section 10.1 for information on
connections.)
Settings
2. Tap
Position
.
ok
3. Tap on the message that appears.
Download File
4. Tap
8-4
System Quick GPS
.
Mio Programs