Mio DigiWalker A502 User Manual page 139

3. Tap the down arrow next to the input field to open the currency list, and
select the currency to convert from (source currency). When a currency
is selected, the abbreviation of the currency will be displayed on the
upper-left corner of the input field.
4. Tap the down arrow next to the output field to open the currency list, and
select the currency to convert to (target currency). When a currency is
selected, the abbreviation of the currency will be displayed on the
upper-left corner of the output field.
5. Enter the currency value in the input
field using the numeric keypad. The
converted currency value immediately
appears in the output field.
You can also perform basic arithmetic
operations in the input field.
NOTE: The program uses the default
exchange rates unless you change them. (See
the following sub-section for information.)
Editing the Exchange Rate
Before performing the currency conversion, you can edit the exchange rate
to the most up-to-date one.
Programs
1. Tap
2. Tap the
3. Select the source and target currencies.
Mio Programs
MioCalc
.
button to switch to the Currency mode.
8-13