Table of Contents
Advertisement
If the navigation program is installed on the device, you can perform the
following operations upon receiving such messages. (Note that the
available operations depend on the type and version of the navigation
program.)
Start the navigation program and navigate to the location contained in
the message.
Start the navigation program and show on the map the location contained
in the message.
Start the navigation program and acquire the address of the location
contained in the message.
Start the navigation program and add the location contained in the
message to the Point-of-Interest (POI) data.
Reply with a text-only message or with a message that contains the GPS
data of your current location.
Delete one or all messages.
NOTE: The navigation might not be absolutely accurate when the location is near the
border on the map.
8.3
Quick Position
Updating the satellite calibration data (ephemeris) file is helpful for quick
GPS positioning when using the optional navigation program. You can
update the satellite calibration data from the GPS module manufacturer's
server using Quick Position.
1. You need to connect to the Internet to
download the new satellite calibration data
file. (See section 10.1 for information on
connections.)
Settings
2. Tap
Position
.
ok
3. Tap
on the message that appears.
Download File
4. Tap
8-4
System
Quick
.
Mio Programs
Advertisement
Table of Contents
