Synchronizing Gmt - Mio DigiWalker A502 User Manual

NOTE: When you adjust the time of a city, the time of the other cities is changed
accordingly.

Synchronizing GMT

To keep accurate time on the device, you can connect to a time server for
synchronizing the GMT time of the device. World Time allows you to
connect to one of 19 default time servers.
1. Connect the device to the Internet. (See section 10.1 for information on
connections.)
Programs
2. Tap
Menu
3. Tap the
4. Select one of the following:
By Internet
Select the server you want to
connect to. Tap the arrow next to
the server name to open the
drop-down list, and select a desired
server from the list. To add a new
time server, tap the
to the server name; to delete a time
server that you have added, tap the
button.
By GPS
Automatically connect to GPS to adjust time when World Time is
Select
started
. This allows the device to connect to GPS and adjust time
automatically every time World Time is started.
Adjust
5. Tap the
NOTE: To perform time calibration in World Time by connecting to the Internet via the
ActiveSync connection right after you restore the device to the factory default state,
first check the Internet settings: tap
Connections
network setting and tap ok. Note that you should change the setting properly when
using other programs that require network connections.
8-10
World Time
soft key and select
button next
soft key to synchronize the time.
Advanced Select Networks. Select My ISP as the private
.
Time Calibration
.
Settings Connections
Mio Programs