E-Mail Direct Push; Setting Up An E-Mail Account; Composing And Sending An E-Mail And Sms Message - Mio DigiWalker A502 User Manual

NOTE: By default, messages you send are saved in the Sent folder on the device to
help conserve memory. If you want to conserve memory and do not want to keep
copies of sent messages, in the messaging list, tap the Menu soft key
Options Message, and cancel the Keep copies of sent items in Sent folder
check box.

E-mail Direct Push

Your device incorporates the Messaging & Security Feature Pack (MSFP).
When connected to the Exchange Server that supports Microsoft Exchange
2003 Service Pack 2 (or later), the device receives real-time notifications of
new e-mails via the Direct Push technology. New e-mails are automatically
downloaded to the device from the Exchange Server; you do not need to
check or download e-mails manually.
Before using the Direct Push feature, you need to set up a synchronization
relationship between the device and Exchange Server and complete the
initial synchronization. (See "Synchronizing Directly with the Exchange
Server" in section 6.1 for more information.)

Setting up an E-mail Account

You need to set up an e-mail account that you have with an Internet service
provider (ISP) or an account that you access using a VPN server connection
(typically a work account) before you can send and receive mail.
Messaging
1. Tap
New E-mail Account
2. Tap
3. Follow the on-screen instructions to complete the setup.

Composing and Sending an E-mail and SMS Message

Messaging
1. Tap
2. Tap the desired account on the account selection screen.
Menu
3. Tap the
4. Enter the e-mail address or text message address of one or more
recipients, separating them with a semicolon. To access addresses and
phone numbers from Contacts, tap
Microsoft Pocket Outlook
.
on the account selection screen.
.
New
soft key .
To
.
Tools
5-13