Install An External Antenna; About The Bar Code Slot Reader - Honeywell Thor CV31 User Manual

Install an External Antenna

About the Bar Code Slot Reader

Thor CV31 Vehicle-Mount Computer User Manual
Install an external antenna to increase the wireless signal strength.
Note: External antennas must only be installed by trained professionals.
1 Lift the cover from the antenna connector.
2 Secure the antenna cable to the connector. The CV31 automatically
detects the connection, disables the internal antenna, and uses the
external antenna.
3 Use your own mounting hardware to secure the antenna to a wall,
forklift, or other surface.
Install a visible light (P/N 858-098-001) or infrared light (P/N 858-098-
002) bar code slot reader (Model AR3) to scan and enter bar code data.
The CV31 decodes the bar code and enters the data or command.
After you install the bar code slot reader, you need to enable and
configure it. By default, these symbologies are enabled: Code 39, Code
128, UPC A, UPC E, EAN 8, and EAN 13. You should only enable the
symbologies that you plan to read.
When you scan a bar code, the Good Read LED turns green to indicate
a successful scan.
Chapter 1 — About the Computer Features
17