About The Backup Battery; Check The Status Of The Backup Battery - Honeywell Thor CV31 User Manual

About the Backup Battery

Check the Status of the Backup Battery

Thor CV31 Vehicle-Mount Computer User Manual
CV31 Power Supply Options for a New Installation
Installation
Electrical CV31 Electrical
Requirement Rating
100-240 12 V, 2.1 A or 9-
VAC,50-60 Hz 36 V, 5.1 A
Vehicle: 9-36 V, 5.1 A
9-36 VDC
Vehicle: 12 V, 2.1 A or 9-
Over 36 VDC, 36 V, 5.1 A
up to 96 VDC
*The connector for the CV31 AC power supply is different than the one
for the CV30. You cannot use the CV31 power supply with a CV30.
If the CV31 is disconnected from external power, the backup battery can
keep the CV31 running in a network connected state for up to 30 minutes.
When power is restored, the CV31 continues normal operation.
An internal charger automatically charges the backup battery (within 8
hours) when the CV31 is connected to external power.
Note: The battery temperature must be with in the acceptable range of
0 °C to 40 °C (32 °F to 104 °F) to charge.
Check the status of the backup battery to make sure that it is functioning
properly.
1 Tap Start > Settings > Control Panel.
2 Double tap Power.
The battery status appears on the Battery tab.
Chapter 1 — About the Computer Features
Use This Power Supply
AC Power Supply (P/N 203-955-001)*
Thor CV31/CV61 Direct Wiring Kit (P/
N 203-950-001)
Universal Vehicle Power Supply Kit
(P/N 203-950-002) with cable P/N
VE027-8024-C0
11