About Usb Scanners; Connect A Usb Scanner; How To Connect A Headset - Honeywell Thor CV31 User Manual

Chapter 1 — About the Computer Features

About USB Scanners

Connect a USB Scanner

How to Connect a Headset

14
To use a USB scanner with the CV31, you need to configure the scanner
as a Human Interface Device (HID). When HID is enabled, scanned bar
code data is sent directly to an active window as if the data came from a
keyboard. You need to configure any data handling settings in the
scanner with the scanner manufacturer's configuration bar codes. For
help, see the scanner user manual.
Connect a USB tethered scanner to the AUX port.
1 Connect an appropriate USB cable to the AUX port on the computer.
2 Connect the scanner to the USB cable.
Use one of these methods to connect a headset or audio device:
• Plug a 3.5 mm (1/8") headset into the headset jack. Note that the
headset jack on the CV31 is not the same size as the headset jack on
the CV30 (2.5 mm, 3/32").
• Use the Bluetooth Audio applet.
• Pair a Vocollect Bluetooth headset with the near-field communication
(NFC) radio.
Thor CV31 Vehicle-Mount Computer User Manual