PREPSTAND ELITE ASSEMBLY SUPPORT LEGS ASSEMBLY Allen Key Clamp strength adjustment NOTE: Always fully expand support legs for a steady foundation. PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
ADJUSTMENT ROTATING ANGLE ADJUSTMENT NOTE: NOTE: Always make sure clamp Always make sure small arm is securely tightened parts box is locked before after rotating. rotating main unit. PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
SMALL PARTS BOX SMALL PARTS BOX OPERATION NOTE: Always make sure small parts box is locked before rotating main unit. WEIGHT SCALE CONVERT SMALL PARTS BOX TO WEIGHT SCALE PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
Page 7
PREPSTAND WITH WEIGHT SCALE WEIGHT MEASUREMENT NOTE: In order to weigh accurately, support legs should be on flat ground and weight scale facing up in vertical position. Make sure item being weighed is not touching Prepstand. PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
Low battery indicator Digital display screen BE AWARE Screw Holes (Screws - Measured data from the M4 x 0.7mm x L20 Topeak weight scale is for Supplied) personal reference only and cannot be used for OPERATION: commercial purposes. Scale Press Off...
PREPSTAND ELITE DISASSEMBLY ROTATE CLAMP ARM TO HORIZONTAL POSITION DISASSEMBLY CLOSE CLAMP JAWS CLICK PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
Page 10
DISASSEMBLY FOLD MAIN UNIT CAUTION Always use both hands to fold down main unit, otherwise main unit might hit your fingers and cause injury. PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
Page 11
DISASSEMBLY FOLD SUPPORT LEGS PREPSTAND SERIES REPAIR & STORAGE SOLUTIONS...
All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual. * The specifications and design are subject to change without notice. Please contact your Topeak dealer with any questions. For USA customer service call : 1-800-250-3068 www.topeak.com...
Need help?
Do you have a question about the Prepstand Series and is the answer not in the manual?
Questions and answers
What size bolt goes in the jaws mount to hold them on
The bolt size needed for the jaws mount on the Topeak Prepstand Series is M4 x 0.7mm x L20.
This answer is automatically generated