Clean only with dry cloth When making the hole in your ceiling to mount the CS-56, make sure there is sufficient clearance behind the ceiling (no obstructions like A/C channels, power lines etc,.) Take care of your speaker wires, they should be free of damage. Damaged speaker wires might result in poor sound quality and can damage amplifiers.
CS-56 Specifications Rated Power: 3/6W Line Voltage: 100V Impedance: 8Ω Speaker size: 5 inch Frequency response: 110-15kHz Sensitivity: 90dB Material: Iron Colour: White IP rating: IP-40 Mounting Hole: Ø170mm Dimensions (LxWxH): 200 x 200 x 67mm Weight: 0,7 Kg Dimensions...
CS-56 Troubleshooting No Sound Always check to see if all of the cables and cords are connected. Always turn off power to the area before checking the wires to prevent electrical shock. If everything checks out and there is still no sound, revisit the manufacturer’s instructions to make sure they were followed during installation.
Need help?
Do you have a question about the CS-56 and is the answer not in the manual?
Questions and answers