Activating/Canceling Usim Lock; Toggling Facial Recognition - SoftBank 940SC User Manual

Activating/Canceling USIM Lock

Activate this function to require USIM Password to
use handset with a different USIM Card.
Tap Menu → Settings →
a
Security
Under USIM lock, On or Off
b
c
Enter USIM Password (four- to
eight-digit) → Tap OK
・ To set to On, enter USIM password (four- to
eight-digit) again and tap OK.
・ USIM Password is dedicated to USIM Card
authentication. If USIM Password matches,
another USIM Card can be used in handset.
Change USIM Password each time USIM lock is
set to On.
・ If you forget USIM Password, insert USIM Card
with USIM lock set to On and reset all settings
(fP.11-9).
Advanced
s
●
Activate/Cancel USIM Lock (rP.14-22)

Toggling Facial Recognition

When powered on, handset verifies user with a
registered image. If Facial Recognition fails, handset
is disabled.
Activate Facial Recognition. Save a user beforehand.
・ Facial Recognition matches current image to one
saved beforehand. When capturing images or
using Facial Recognition, remember these points:
- Make sure your face (eyes, mouth, nose,
eyebrows, etc.) is clearly visible. Facial features
may be obscured by hair, colored glasses, hat,
etc., inhibiting image capture or recognition.
- Face should be lit evenly and brightly. Avoid
Backlight, strong light, or shadows.
Note
・ Identification accuracy is not guaranteed.
SoftBank Mobile is not liable for misuse or
damages associated with Facial Recognition .
・ Phone Password is required for Facial
Recognition settings or cancellation upon
recognition failure . Changing Phone
Password enhances security (fP .11-3) .
Setting
Tap Menu → Settings →
a
Security → Facial recognition
Enter Phone Password →
b
Tap OK
c Under On/Off, On or Off
・ If image is not registered, confirmation
appears. Choose Yes to register image.
・ Enter Phone Password → Tap OK to set to Off.
・ Set to On to match your face to the saved portrait
when handset is turned on. If the recognition fails,
handset is disabled.
11
11-5