Activating/Canceling Password Lock; Activating/Canceling Pin Code; Activating/Canceling Usim Lock - SoftBank 941SC Manual

Activating/Canceling Password Lock

After Password lock is activated, Phone Password
is required for handset operations such as turning
on handset or turning off Display. No operations
are accepted until you enter the correct password,
except some operations such as receiving calls.
→
a Settings
Tap Menu
b Password lock
c
Select an option
■ To Activate It When Turning Off Display
or On Handset Power
Auto
■
To Activate It When Turning On
Handset
At power On
■ To Deactivate It
Off
d
Enter Phone Password

Activating/Canceling PIN Code

11
PINs are security codes for USIM Card. For details,
see "USIM Card" (fP.1-7).
To activate PIN Certification each time the power is
turned on, set this function to On.
Setting
→
a Settings
Tap Menu
b Under PIN certification, On or Off
→
c
Enter PIN Tap OK
11-4
Canceling
If PIN or PIN2 is incorrectly entered three consecutive
times, PIN Lock or PIN2 Lock is activated to restrict
handset operations.
Note
・ For more information about PUK and PUK2,
→
Security
contact SoftBank Mobile Customer Center,
General Information (fP.15-31).
・ Entering incorrect PUK Code ten
consecutive times locks USIM Card (turning
handset off does not reset the count).
・ Once locked, USIM Card cannot be
unlocked. Contact SoftBank Mobile
Customer Center, General Information
(fP.15-31).
To cancel PIN Lock or PIN2 Lock, perform following
operations.
a
In PUK Code entry window, enter
→
Tap OK
PUK Code
b
Enter new PIN or PIN2 (four- to
eight-digit)
c
Enter new PIN or PIN2 again (four-
to eight-digit)
→
Security
→
Tap OK
→
Tap OK
→
Tap OK

Activating/Canceling USIM Lock

Activate this function to require USIM Password to
use handset with a different USIM Card.
→ Settings →
a
Tap Menu
Under USIM lock, On or Off
b
c
Enter USIM Password (four- to
→
eight-digit) Tap OK
・ To set to On, enter USIM password (four-
to eight-digit) again and tap OK.
・ USIM Password is dedicated to USIM Card
authentication. If USIM Password matches, another
USIM Card can be used in handset.
Change USIM Password each time USIM lock is
set to On.
・ If you forget USIM Password, insert USIM Card
with USIM lock set to On and reset all settings
(fP.11-8).
Security