S! Gps Navi; Using S! Gps Navi - SoftBank 940SC User Manual

Using Call Remote Lock
a
Place a call from one of the
specified numbers with Send
Caller ID
b
Hang up after receiving call
c
Repeat -
a b
minutes, until specified
number of incoming calls is
reached
・
After specified number of incoming calls, IC
Card Lock is set and a message informs you
IC Card Lock is activated.
Note
・ When setting IC Card Lock, call handset
10 from the same specified phone number.
Incoming calls from different phone numbers
cannot be counted .
・ Calls may not be counted when Call
Forwarding is active .
10-8
Advanced
brP.10-22
●
Viewing IC Card Details
●
Viewing Balance Info
●
Deleting from Balance Info List
●
Restricting Functions from Activating Automatically
●
Restoring to Default Settings
, within three
s
●
Set Security to Lifestyle-Appli (rP.14-21)

S! GPS Navi

S! GPS Navi provides location information by
communicating with base stations and by GPS
satellite.
Note
・ Location information may not be
retrievable or may be inaccurate depending
on location or signal conditions .
・ SoftBank Mobile is not liable for any trouble
caused by information provided .
・ S! GPS Navi incurs Packet Communication
charges . For more information, visit
SoftBank Mobile Website (http://www .
softbank .jp) .

Using S! GPS Navi

Activate Navi appli to check your surroundings and
plan the shortest route to your destination.
Tap Menu → Tools → S! GPS
a
Navi → Navi appli
・ If confirmation appears, choose Yes.
・ Tap Never show this to disable confirmation
message.
・ Navi appli activates after location information
is retrieved.