Charge Battery - SoftBank 940SC User Manual

Hide thumbs Also See for SoftBank 940SC:
Table of Contents

Advertisement

Charge Battery

・ If handset is on while Charger is connected,
battery indicator shows charge level, charging
as follows:
.
when battery is fully charged. If handset is
off, Charging... appears while charging and
when battery is charged, Battery full appears.
External Light illuminates in red while charging.
・ An empty battery requires approximately 250
minutes to be charged with power off. Charging
time may vary depending upon the ambient
temperature.
AC Charger
a
Open Port Cover; with label down,
insert Charger Connector into
flashes
External Device Port
Note
・ Make sure Charger Connector is label side
down before inserting it .
External Device Port
Port Cover
b
c
USB Charge
Connect handset to PC via USB Cable to charge
battery.
Charger Connector
a
Label Side
Note
AC100V
Outlet
・ Make sure Charger Connector is label side
down before inserting it .
b
Charger
c
・ USB charging takes longer; charging time
Plug AC Charger into an AC 100V
outlet
When battery is charged,
disconnect handset, close Port
Cover, and unplug AC Charger
Open Port Cover; with label down,
insert USB Cable Connector
into External Device Port
Insert USB Plug into PC USB port
When battery is charged,
disconnect handset, close Port
Cover, and remove USB Plug
varies according to the PC. A weak battery
may not charge via USB.
1
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

940sc

Table of Contents