Password Lock; Activating/Canceling Pin Code; Activating/Canceling Usim Lock - SoftBank 840SC User Manual

Password Lock

After Password Lock is activated, in Standby, press
any key to show Phone Password entry window.
Enter Phone Password to unlock.
→ →
a Settings
f
Password lock →
b
c
Enter Phone Password
・ Even if Password Lock is set, some operations such
as receiving calls can be performed.
・ Upon Password Lock activation, Standby Display
reappears. Press any key to show Phone Password
entry window. Enter Phone Password to unlock,
Password lock is automatically set to Off.

Activating/Canceling PIN Code

PINs are security codes for USIM Card. For details,
see "USIM Card" (fP.1-4).
To activate PIN Certification each time the power is
turned on, set this function to On.
11
Setting
a → Settings →
f
PIN certification
b
→
c
Enter PIN f (OK)
11-4
Canceling
If PIN or PIN2 is incorrectly entered three consecutive
times, PIN Lock or PIN2 Lock is activated to restrict
handset operations.
Security
Note
On or Off
・ For more information about PUK and PUK2,
contact SoftBank Mobile Customer Center,
→
f (OK)
General Information (fP.15-31).
・ Entering incorrect PUK Code ten
consecutive times locks USIM Card (turning
handset off does not reset the count).
・ Once locked, USIM Card cannot be
unlocked. Contact SoftBank Mobile
Customer Center, General Information
(fP.15-31).
To cancel PIN Lock or PIN2 Lock, perform following
operations.
a
In PUK Code entry window, enter
PUK Code
b
Enter new PIN or PIN2 (four- to
eight-digit)
c
Enter new PIN or PIN2 again (four-
Security
to eight-digit)
→ On or Off
Advanced
s
● Activate/Cancel PIN Certification (rP.14-24)
● Change PIN (rP.14-24)
●
Change PIN2 (rP.14-24)
→
f (OK)
→
f (OK)
→
f (OK)

Activating/Canceling USIM Lock

Activate this function to require USIM Password to
use handset with a different USIM Card.
→ Settings → Security
a
f
USIM lock → On or Off
b
c
Enter USIM Password (four- to
→
eight-digit) f (OK)
・ To set to On, enter USIM Password (four-
to eight-digit) again and press f (OK).
・ USIM Password is dedicated to USIM Card
authentication. If USIM Password matches, another
USIM Card can be used in handset.
Change USIM Password each time USIM lock is
set to On.
・ If you forget USIM Password, insert USIM Card
with USIM lock set to On and reset all settings
(fP.11-7).
Advanced
s
● Activate/Cancel USIM Lock (rP.14-24)