Call Barring - SoftBank 940SC User Manual

Talking with All Parties
a
While connected with multiple
parties, tap Group call func →
Change to group call
・ To talk with one party again, tap Group call
func → Change to private call →
・ To end all calls, tap Group call func → Select End
all calls.
・ When one party ends the call during Conference
Call, continue talking with remaining parties.
Advanced
brP.3-24
●
Ending Selected Call

Call Barring

Bar outgoing/incoming Voice Calls, Video Calls or
SMS by conditions listed below.
Item
Outgoing call
.
Disables calling or
Bar all outgoing
sending SMS to all but
calls
emergency numbers.
Disables outgoing
Bar all international
international calls and
calls
SMS.
Disables calling or
Bar international sending SMS to numbers
calls outside of Japan and the
country where you are.
Incoming call
Bar all incoming Blocks all incoming calls
calls and SMS.
Blocks all incoming
Bar all roaming
international calls and
calls
SMS.
・ Setting Call Barring requires Network Password
(four-digit number specified at subscription).
Network Password can be changed (fP.3-20).
・ If a call is placed while Call Barring is active, a
message appears indicating that Call Barring is
active. The message may appear after a while
depending on service area.
Note
・ If incorrect Network Password is entered
three consecutive times, Call Barring is
disabled . In this case, change Network
Password and Center Access Code . For
Description
details, contact SoftBank Mobile Customer
Center, General Information (fP .15-27) .
・ If Call Forwarding or Voicemail is active,
Bar all outgoing calls and Bar All
incoming calls cannot be set (Optional
Services override Call Barring settings) .
3
3-19