Using Handwriting - SoftBank 940SC User Manual

Kana/Kanji
Use predictive entry to convert and enter characters.
2
Alternatively, directly convert entered hiragana.
Katakana or pictograms may appear in Suggestions.
鈴木
Example: Enter
Using Keypad
a Changing to Keypad ( f P.2-9)
漢かな
→
b
c
Tap three times
す
・
is entered.
d
・ To enter same character continuously, tap
to move cursor to the right.
three times →
e
Tap
ず
・
is entered.
f
Tap twice
き
・
is entered.
鈴木
g
Tap
2-10

Using Handwriting

Enter text in Handwriting mode.
a Change to Handwriting ( f P.2-8)
漢かな
→
b
c
In Handwriting field, enter
ず き
and continuously
鈴木
d
Tap
・ After entering hiragana, tap
・ After entering hiragana, tap
・ Tap
or press c to cancel a misentry.
・ If you over-toggle target character, press t /
to toggle in reverse.
・ To set as Hiragana, tap Confirm.
す
・ If no suggestions appear, tap Convert →
,
to change conversion range → Tap target
conversion alternatives → Repeat steps for other
characters.
・ If many suggestions appear, tap
Suggestions. To restore default size, tap
・ If conversion fails, try another reading. For multiple
Kanji words, try converting characters separately.
・ While suggestions appear, tap Convert for
conversion alternatives. While conversion
alternatives appear, tap Predict to return to
Suggestions.
・ Kanji cannot be entered directly in Handwriting.
・ In Handwriting mode, suggestions appear
in Function field. If a character is mistakenly
converted, select correction from Suggestions.
Tap to close Suggestions.
漢かな
・ In Handwriting mode,
other non-Hiragana, yields most similar Hiragana.
to add ゛ or ゜ .
to toggle size.
/
to expand
.
entry, entering