Security Codes; Network Password; Phone Password; Pin2 Code - SoftBank 940SC User Manual

Security Codes

1
Phone Password, Center Access Code and
Network Password are required to use handset.

Phone Password

The four-digit number (Default: 9999) is required to
operate/change some handset functions.
・ Entered Phone Password digits are represented
with *.
・ If incorrect, an error message appears. Try again.
・ Phone Password can be changed on handset
(fP.11-3).
Center Access Code
Four-digit number specified at subscription; required
to change service subscriptions or optional services
to operate handset from landlines.
1-20

Network Password

Four-digit number specified at subscription, required
to restrict handset services. Entering incorrect
Network Password three consecutive times locks
Call Barring settings. To resolve, Network Password
and Center Access Code must be changed. For
details, contact SoftBank Mobile Customer Center,
General Information (fP.15-27).
・ Network Password can be changed on handset
(fP.3-20).
Note
・ Write down Phone Password, Center
Access Code, and Network Password . If
you lose a code, contact Customer Service
(fP .15-27) .
・ Do not reveal Phone Password, Center
Access Code, or Network Password to others .
SoftBank Mobile is not liable for damage
caused by misuse of these codes by others .
PIN Code
USIM Card features two security codes: PIN and
PIN2.
PIN Code
Use PIN (four- to eight-digit) to prevent
unauthorized use of handset by others.
・ Modify PIN (fP.11-3).
・ When PIN Lock is activated, PIN entry is required
each time handset is turned on or whenever
USIM Card is re-inserted (fP.11-4).

PIN2 Code

PIN2 (four- to eight-digit) is required for resetting
Call time & cost or editing Set max cost limit,
etc.
・ Modify PIN2 (fP.11-3).