Voice Call; Placing A Voice Call; Receiving A Voice Call - SoftBank 940SC User Manual

Voice Call

Placing a Voice Call

3
Directly enter phone number to call.
To place a call from Phone Book, see Calling
from Phonebook (fP.2-19).
t (1 + seconds)/Tap Phone
a
and Dial → Enter phone
number including area code
Phone Number
Entry Window
b
Confirm entered phone
number → t or Call
To end the call → y
c
3-2
・ To correct entered digit, tap Clear or press
c. Touch and hold Clear or press c
for 1 + seconds to delete all.
・ To enter P (pause), tap
twice. To enter
(International Code), touch and hold
・ When the line is busy, press y to end the call
and try again later. If Auto redial (fP.14-9) is On,
number is automatically redialed. Tap Cancel or
press y to cancel redialing.
・ When Stereo Earphone Microphone (optional)
is connected and Earphone call is set to On,
press Stereo Earphone Microphone switch for 1+
seconds to call specified phone number. Press it
again for 1 + seconds to end the call.
・ To input numbers for automatic voice service
guidance, tap Dial for Keypad and tap numbers.

Receiving a Voice Call

a
Voice Call window appears,
+
t
.
To end the call → y
b
・ To put caller on hold, press y. To connect the
call, tap Answer or press t.
・ To adjust ringer volume, press n / b.
・ If Stereo Earphone Microphone (optional) is
connected, press Stereo Earphone Microphone
switch for 1 + seconds to accept Voice Calls. Press
it again for 1 + seconds to end the call.
・ Missed Call Window
Missed call window appears for unanswered calls.
Tap View to view incoming calls (fP.3-10).
・ Ringtone
Specify Ringtones by Phone Book entry or Category
(fP.2-21, P.2-23). If they are not set, they will ring
according to the activated mode (fP.1-17).
If Security → Secret mode is set to Hide when a
call from a secret entry is received, the handset will
ring according to the activated mode.