Automatically Printing Lists & Reports; Automatically Printing Lists & Reports - Toshiba e-STUDIO3511 Operator's Manual

2. AUTOMATICALLY PRINTING LISTS & REPORTS
Automatically Printing Lists & Reports
Reports are automatically output if the conditions in the setting of the lists & reports output ("Setting the Lists
and Reports Output"
* Lists and reports are printed on LT/A4-size paper.
If LT/A4-size paper has run out, lists and reports are printed on larger size paper.
- Transmission journal:
Printed after every 40 (or 120) transmissions.
- Reception journal:
Printed after every 40 (or 120) receptions.
- Memory transmission report
After memory transmission has ended, this report is output. The reduced transmission document can also
be added by using "PRINT 1st PAGE IMAGE?".
- Direct transmission report:
After direct transmission has ended, this report is output.
- Multi-transmission report:
After multi-address transmission has ended, this report is output. The reduced transmission document
can also be added by using "PRINT 1st PAGE IMAGE?".
- Polling report:
After polling RX has ended, this report is output.
- Relay originator transmission report:
When this facsimile is setup as a relay originator, the transmission report is output for sending to the relay
stations. The reduced transmission document can also be added by using "PRINT 1st PAGE IMAGE?".
- Relay station transmission report:
When this facsimile is setup as a relay station, the transmission report is output for sending to the relay
destinations. The reduced transmission document can also be added by using "PRINT 1st PAGE
IMAGE?"
- Relay destination transmission report:
When this facsimile is setup as a relay station, the transmission report for sending to the relay
destinations is transmitted to the relay originator. The reduced transmission document can also be added
by using "PRINT 1st PAGE IMAGE?"
- Mailbox reception report:
Printed when the original is received in the confidential, bulletin board or relay mailbox.
- Power failure list:
The list of the job which were erased will be output if there is something wrong with the contents of the
image memory when the main power switch is turned ON after a power failure during Fax communication.
Page 106) are satisfied.
6
105