Nd Line Setting - Toshiba e-STUDIO3511 Operator's Manual

4
Press the [INITIAL SETUP] button.
5
Select either of the [DP] or [MF] buttons
for the dial type (line 2) setting
- Press the [Next] or [Prev] button to switch the screens as
required.
- DP, MF "3.SETTING THE RECEPTION MODE"
6
Press the [ENTER] button.

2nd Line Setting

When the optional 2nd line board is installed, its operation can be selected from the following:
- Transmission/Reception
Both transmission and reception are available all the time.
- Reception only (24 hours)
The 2nd line is always standing by for reception.
- Reception only (timer)
Only reception is available during the specified period of time.
* Even during reception only, the specified line performs transmission if any line has been specified by the
options or address menu.
1
Press the [USER FUNCTIONS] button on
the control panel.
Page 134
7
137