When The Following Messages Appear - Toshiba e-STUDIO3511 Operator's Manual

1. WHEN THE FOLLOWING MESSAGES APPEAR

When the following messages appear on the touch panel, press the [FUNCTION CLEAR] button to clear
the error message and perform the appropriate remedy for the error.
For details of messages not listed below, see the [Operator's Manual for Basic Functions].
Message
Memory overflow
Communication error
Job reservation full
Job memory full
Sorry not possible
Not allowed now
Too Many Tel # Digits
8
150
8.TROUBLESHOOTING
Cause
Memory overflowed when
scanning documents to the
memory.
Communication error occurred
during direct TX.
The number of reserved jobs
exceeded 100.
The total number of destinations
for outgoing call jobs exceeded
1,000.
On-hook or direct TX was
attempted during communications.
Further polling transmission
reservation was attempted even
though polling transmission was
already reserved.
128 digits or more was registered
in the chain dial communication.
Remedy
Either wait for memory to be cleared, or
check the jobs and delete reserved jobs to
clear memory.
Retry communications.
Either wait for job reservations to be
completed, or check the jobs and delete
reserved jobs.
Either wait for outgoing call jobs to be
completed, or check the jobs and delete
reserved jobs.
Wait for communications to end and retry
communications.
Either wait for polling transmission jobs to
be completed, or check the jobs and delete
reserved jobs.
Confirm the number of digits dialed and
register the numbers again.