Specifying The Remote Fax; Direct Entry With Digital Keys - Toshiba e-STUDIO3511 Operator's Manual

5. SPECIFYING THE REMOTE FAX

Direct Entry with Digital Keys

Direct entry is the method for specifying remote Fax numbers by the digital keys.
1
Place the original(s).
2
- "Setting Originals"
2
Press the [FAX] button on the control
panel.
3
Key in the remote Fax number.
4
If you make a mistake, press the [CLEAR]
button on the control panel or the [BACK
SPACE] button in the address menu and
correct the mistake.
- [CLEAR] button: Press this button to clear all values you have
entered.
- [BACK SPACE] button: Press this button to delete each value you
have.
When you are dialing to an outside line via a PBX, there may be a
pause before the connection is made, causing a transmission error.
To avoid this error, press the [MONITOR/PAUSE] button after the
number that designates an outside line to enter a pause. This
automatically enters a thee-second pause before the remote Fax
number is dialed, which reduces transmission errors.
(The mark "-" is displayed as a "pause" on the screen.)
5
Press the [START] button.
36
2.SENDING A FAX
Page 27